Position:Home > Extra Equipment

C/CM-Machines



Extra Equipment for Engine Rebuilding Machines

AMC-SCHOU delivers a wide selection of extra equipment for the C/CM-Machines.These expansions make the everyday use of the machine faster and thereby more profitable.

 

Boring Spindle 1-4
AMC-SCHOU supplies a full range of spindles. Above are spindles covering the range from 48-260 mm (1.89"-10.24")
No. 1: 48-72 mm (1.89"-2.83")
No. 2: 62-100 mm (2.44"-3.94")
No. 3: 92-200 mm (3.62"-7.87")
No. 4: 145-260 mm (5.71"-10.24")
Boring Heads
Extra boring heads are supplied with some spindles. The 140 mm. boring head is standard with the spindle No.3. The larger 190 mm. boring head comes with spindle No.4 and No.7 as standard equipment. Furthermore are boring heads size 260 mm. and 300 mm. available for spindel No.4 and No.7.
Boring Spindle No. 5
The smallest spindle from AMC-SCHOU with a range from 32-50 mm (1.26"-1.97")
Morse Taper
The morse taper No. 3 can be used for drilling operations as shown here.
Insert Boring Tools
AMC-SCHOU supplies hardened tool holders with high-speed inserts. Triangular inserts (3 cutting tips per insert) are standard. Special inserts are available from all the major insert suppliers; standard size inserts fit AMC-SCHOU tool holders.
Storage and Loading Fixture for Spindles
The AMC-SCHOU storage fixture doubles as a loading arm. When loading a heavy milling head, the spindle will be perpendicular to the mounting surface of the boring slide, allowing trouble free mounting always.
Tool Grinder
The TG-1 tool grinder with its 150 mm (5.91") grinding and diamond lapping wheels ensures that correct angles are ground on carbide tipped boring tools. Can also be used to grind boring tools for line boring machines as well as con-rod boring and grinding machines.
Quick Acting Clamps
These clamps are indispensable when reboring in-line blocks.
Universal Boring Stand
With V-blocks, 60° and 90° inclinations can be achieved with this stand.
Can be used for reboring or milling operations.
Adjustable Angle Fixture
All angles between 60° and 90° can be achieved using the adjustable angle fixture.
Can be used for reboring and milling operations.
Adjustable Roll-Over Fixture
Reboring and milling of small to medium size blocks using this equipment will reduce setting-up time and increase productivity
  • Contact
  • AMC-SCHOU A/S, Niels Bohrs Vej 41, Stilling 8660 Skanderborg
  • Tel.: +45 87 54 54 54
  • Fax: +45 87 54 54 55
  • E-mail: info@amc-schou.dk

  • AMC-SCHOU (Zhangjiagang) Bonded Zone Mechanical Co., Ltd
  • Add: No. 9, Gangao Road, Free Trade Zone, Zhangjiagang 215634, P.R. China
  • Tel.: +86 512 5631 9061
  • Fax: +86 512 5631 7962
  • Email: amc@amc-schou.dk

 

  • AMC-SCHOU

Copyright ©  amc-schou.dk  All Rights Reserved.    AMC-SCHOU   Technical Support:H-stone Culture